-
Why does the automotive industry choose PUR hot melt adhesive machine？
Feb 07 , 2023
For high-end products such as automobiles, the requirements for the specifications of each component are very high during the production process. Every screw must be strictly inspected before it can be used. Today we are going to talk about the sealing performance of automobiles. It is very important in automobile manufacturing and has relatively high quality requirements. At present, most of the ...
Read More
-
How to quickly replace the hot melt adhesive in the hot melt adhesive machine?
Feb 20 , 2023
Hot melt adhesive is a kind of plastic adhesive, which is in a solid state at room temperature, and can be quickly bonded after heating and melting. The hot-melt glue machine is a device for melting hot-melt glue. When it is not working, the hot-melt glue in the hot-melt glue machine host, hot-melt glue tube, and hot-melt glue gun cools and stays inside. 1.Advantages and disadvantages of hot melt ...
Read More
-
Hot melt adhesive machines are widely used in various industries
Mar 06 , 2023
The hot melt glue machine is mainly used for automatic application equipment for spraying glue, scraping glue, rolling glue, applying glue, and injecting glue. Industrially, the hot melt adhesive is used to melt and solidify quickly after coating and cooling after heating, and to bond the substrate. Therefore, the most basic function that the hot melt adhesive machine should have is to melt the ho...
Read More
-
Will the temperature affect the use of the hot melt adhesive machine?
Jun 15 , 2023
The hot melt adhesive machine is a high-temperature equipment used by controlling the temperature and heating, so changes in the ambient temperature will also have a certain impact on the hot melt adhesive machine, and we must make corresponding adjustments when operating the hot melt adhesive machine. So, how to use the hot melt adhesive machine in different temperature environments? Generally sp...
Read More
-
Hot melt glue machine filter cleaning
Jun 28 , 2023
Cleaning steps of hot melt adhesive machine: 1. It is necessary to set the temperature of the hot melt adhesive machine system to the operating temperature; 2. Remove the filter from the branch seat, and check whether the filter needs to be replaced; 3. If it needs to be replaced, install a new filter, and at the same time use a new sealing ring and apply high-temperature oil; 4. If it does not ne...
Read More
-
The importance and key points of PUR edge banding
Aug 11 , 2023
The importance and key points of edge banding Edge banding is a point that cannot be ignored in the manufacture of wooden doors. In fact, a good and strict edge banding board not only makes the wooden door good or bad, but also determines the service life of the wooden door, as well as its aesthetics and environmental health. There is another important point, that is, the unavoidable application o...
Read More
-
Why does hot melt adhesive smoke during use?
Sep 08 , 2023
1. The operating temperature set by the hot melt adhesive machine is too high Usually people think that when using hot melt adhesive, the higher the temperature, the faster the melt adhesive and the faster the gluing speed. Actually, this is a misunderstanding. When the hot-melt adhesive is melting, the velocity and temperature of the hot-melt glue are roughly an attenuating oscillatory function c...
Read More
-
Hot melt adhesive used for gluing masks, protective clothing, disposable mattresses and wet wipes covers
Oct 25 , 2023
Hot Glue is a plastic adhesive. Its physical state changes with temperature within a certain temperature range, but its chemical properties remain unchanged. It is non-toxic and odorless, and is an environmentally friendly chemical product. It is favored because the product itself is solid, easy to package, transport, store, solvent-free, non-polluting, and non-toxic; as well as its simple product...
Read More
-
Why is it not recommended to mix hot melt glue?
Nov 03 , 2023
Each adhesive has specific properties. Even if hot melt adhesives look the same, that doesn't mean they have the same chemical structure. 2 reasons why mixing is not recommended 1. Clogging of hoses and hot melt glue guns Suppose you change from a hot melt adhesive that is used at 150-170°C to one that is used at 130-150°C. What happens if you mix new hot melt glue into the old glue in the glue ta...
Read More
contact us
