-
Maintain about hot melt glue machine
Jul 02 , 2020
Melting machine repair -more carefully maintain machine,more durable it is When maintaining and repairing the glue precision applicators, the following main safety precautions should be taken: 1.Before the maintenance work of the roller glue applicator, the power supply on the hot melt adhesive machine and the main power supply connected to the outside must be cut off, an...
Read More
-
Hot melt roller coater introduction
Apr 25 , 2021
Gluing machine is a kind of equipment that is widely used in sheet materials. The glue is applied by the glue tank, and the motor drives the roller to rotate. The liquid hot melt glue is evenly spread on the shaft, and the material naturally rolls on the material when it passes through. This type of hot wood glue roller applicator is divided into different lengths according to the width...
Read More
-
Mouse trap boards gluing machine:YT-LS210
May 15 , 2021
LS210 is including glue melt tank 1set,hot melt hose 1pcs,210mm slot die 1pcs,auto feeder 1 set,transmission part 1set,pneumatic control part 1set,electric part 1set. 1.Glue melt tank:20kgs It has touch panel to control equipped with gear&n...
Read More
-
Shoe material hot melt glue spraying machine
Jul 17 , 2021
Shoe material hot melt glue spraying machine, automatic glue spraying machine equipment 1. Light weight, small size and easy to move. Can be placed on the workbench arbitrarily. 2. Pressure maintaining power system. Save energy and effectively reduce the production cost of enterprises. 3. The pressure and flow can be adjusted. The glue flow can be freely controlled by the air pressure and the stro...
Read More
-
High speed full automatic tissue paper carton boxpacking machine
Jul 20 , 2021
1. Product introduction The box sealing machine is divided into: box sealing mechanism, hot melt glue tank, push box mechanism, and fixed frame. The equipment is suitable for the production of carton box sealing and packaging technology. It is used in product box packaging in food packaging, cosmetic packaging, tissue packaging, electronic toys and other industries. 2. Features Carton sealing fold...
Read More
-
Introduction of hot melt glue hose
Jul 30 , 2021
1.The use of imported Teflon liner, has good flexibility, good bending performance (maximum bending radius of 20cm), anti-sticking and temperature resistance (up to 220 degrees), can greatly reduce the carbonization phenomenon; 2.The heater by the United States and the temperature of the heating wire lines, evenly wrapped around the pipe wall, with good insulation and uniform thermal conductivity,...
Read More
-
YT-DT1000 Hot Melt Glue Applicator Machine Small Carton Gluing Machinery
Aug 02 , 2021
1. Specially designed for gluing large-area flat materials according to product requirements and different materials. The thickness of the glue can be adjusted. Environmentally friendly hot melt glue is used instead of self-adhesive glue, water-based glue, etc. 2. It has a safety design to prevent the hand from being caught in the roller, and the device to prevent the work from being caught in the...
Read More
-
YT-LS100 Strip hot melt glue gun automatic nozzle
Aug 03 , 2021
Features of strip hot melt glue gun: 1. Optimize the gun body control module, and adopt multiple combination seals to ensure that the gun is prevented from being polluted by leaking glue after a long time of work. 2. The special design of the switch glue liquid contact point ensures the high sensitivity of the switch glue. 3. The integrated module and the main body of the scraper can produce fast ...
Read More
-
Hot melt adhesive glue
Aug 04 , 2021
Hot melt adhesive is a 100% solid, which becomes molten after heating, and it condenses when it contacts the air when it meets the cold surface, and then it only takes a few seconds to finish. Compared with solvent-based and water-based solvents, the primary benefits are as follows: 1. After a short time, to ensure high-efficiency production. 2. No need for drying equipment, saving space. 3. Non-t...
Read More
contact us
