-
How to choose a good hot melt hose?
Aug 19 , 2021
From the analysis of the current sales, the glue machine hose has occupied most of the market, but how to distinguish the inferior hot melt glue hose? Let me share some small methods for everyone. 1. The insulating layer is easy to wear and leakage occurs 2. Glue leakage occurs when the insulating sleeve is broken 3. The rusty joints will also cause glue leakage 4. The pipe bursts due to uneven he...
Read More
-
What happens if the hot melt glue machine is not processed for a long time?
Aug 19 , 2021
What should I do if I do not use the hot melt glue machine for a long time? 1. Clean all parts of the machine first, and do not leave any stains and dust impurities to prevent rust 2. After cleaning, put it in the vent to let the water vapor evaporate automatically. 3. Lubricate oil, protect oil, etc. on the roller position, 4. In order to prevent too much dust, it is recommended to find a dry, du...
Read More
-
Installation of Hose & Nozzle Assembly
Aug 20 , 2021
1.Fix the nozzle assembly horizontally or vertically in a proper place (assembly line,a desktop shelf,etc) with a Ф0.5” steel stick. Keep the nozzle facing the area to be sprayed or injected or coated. Note:When removing or installing nozzle assembly,extreme care should be given to protect the nozzle. 2.Connect one side of the hose to the outlets of manifold,and tighten the connection part with a ...
Read More
-
What are the temperature control methods of the hot melt glue machine?
Aug 21 , 2021
Temperature is the main factor that affects the glue spraying effect of the hot melt glue machine. If the temperature is too low, the melting speed of the glue is not good. The glue sprayed by the hot melt glue spraying machine is not ideal. The spray glue is beautiful. How can we control the temperature of our products? There are a total of three temperature control methods for hot melt adhesive ...
Read More
-
How to correct the crooked glue strips ejected from the hot melt glue machine
Aug 21 , 2021
1. During the glue spraying process of the hot melt glue machine, the glue strip is not straight when it is turned on from the beginning. , Do not hit the air pressure too high, it should be within the specified range of the hot melt glue machine manual. 2. If the glue spraying of the hot melt glue machine is stable at the beginning, and the glue path is skewed during the walking process, it can b...
Read More
-
Cleaning steps of filter screen of hot melt glue gun
Aug 23 , 2021
The filter screen of hot melt glue gun is mainly used to filter the impurities in the glue and reduce the damage to the main body of the glue gun. The hot melt glue gun is mainly divided into two types: one is the manual hot melt glue gun, and the other is the self hot melt glue gun, also known as needle valve. The manual hot melt glue machine is manually controlled. The amount of glue ejected is ...
Read More
-
Several factors affecting the development of automatic dispensing machine
Aug 25 , 2021
1. The key factors for the success of Technology Industry: R & D ability, process innovation ability, product innovation ability, constantly developing new products and occupying new markets. In this way, it will avoid homogeneous competition. 2. Key factors for the success of sales industry: technical support, customer service, order processing, product line and alternative product width, com...
Read More
-
Hot melt adhesive machine and construction, packaging industry
Aug 25 , 2021
(1) Hot melt adhesive machine for construction In the construction industry, hot melt glue machine is mainly used for structure and decoration, such as insulation and isolation of cork plywood, laminated wood plastic floor, wallpaper, etc., and bonding of decorative plates and non stress components. The use of hot melt glue machine in buildings can not only improve the building quality, increase t...
Read More
-
Advantages of hot melt adhesive in hot melt adhesive machine
Aug 26 , 2021
Performance advantages of hot melt adhesive in hot melt adhesive machine; ① Fast curing speed, good bonding strength and flexibility. The hot melt adhesive ejected by the hot melt adhesive machine can be cured and bonded within tens of a second to a few seconds. It has the characteristics of melting when heated and sticking when cooled. This enables the packers to use the hot-melt machine to adopt...
Read More
contact us
