-
The reason why the hot melt glue machine does not heat up
Aug 16 , 2021
With the change of the times, mechanization is getting closer and closer to life. Most of the products used in life need to be bonded to form objects. The glue required for traditional bonding has been gradually eliminated with the strengthening of environmental protection awareness, and the environmental friendly hot melt adhesive has gradually appeared in the public view, Among them, the essenti...
Read More
-
The method of cleaning nozzles
Aug 17 , 2021
The nozzle is an important part of the hot melt glue machine accessories. The glue comes out of the glue nozzle, but if it is used improperly, it is easy to cause blockage and reduce work efficiency. So when we stop using the hot melt glue machine, what should we do? How about cleaning nozzles? 1. Use a smokeless hot air gun to heat it, and then wipe it clean with a clean cloth. 2. The nozzle is i...
Read More
-
How to choose a good hot melt hose?
Aug 19 , 2021
From the analysis of the current sales, the glue machine hose has occupied most of the market, but how to distinguish the inferior hot melt glue hose? Let me share some small methods for everyone. 1. The insulating layer is easy to wear and leakage occurs 2. Glue leakage occurs when the insulating sleeve is broken 3. The rusty joints will also cause glue leakage 4. The pipe bursts due to uneven he...
Read More
-
What happens if the hot melt glue machine is not processed for a long time?
Aug 19 , 2021
What should I do if I do not use the hot melt glue machine for a long time? 1. Clean all parts of the machine first, and do not leave any stains and dust impurities to prevent rust 2. After cleaning, put it in the vent to let the water vapor evaporate automatically. 3. Lubricate oil, protect oil, etc. on the roller position, 4. In order to prevent too much dust, it is recommended to find a dry, du...
Read More
-
Installation of Hose & Nozzle Assembly
Aug 20 , 2021
1.Fix the nozzle assembly horizontally or vertically in a proper place (assembly line,a desktop shelf,etc) with a Ф0.5” steel stick. Keep the nozzle facing the area to be sprayed or injected or coated. Note:When removing or installing nozzle assembly,extreme care should be given to protect the nozzle. 2.Connect one side of the hose to the outlets of manifold,and tighten the connection part with a ...
Read More
-
What are the temperature control methods of the hot melt glue machine?
Aug 21 , 2021
Temperature is the main factor that affects the glue spraying effect of the hot melt glue machine. If the temperature is too low, the melting speed of the glue is not good. The glue sprayed by the hot melt glue spraying machine is not ideal. The spray glue is beautiful. How can we control the temperature of our products? There are a total of three temperature control methods for hot melt adhesive ...
Read More
-
How to correct the crooked glue strips ejected from the hot melt glue machine
Aug 21 , 2021
1. During the glue spraying process of the hot melt glue machine, the glue strip is not straight when it is turned on from the beginning. , Do not hit the air pressure too high, it should be within the specified range of the hot melt glue machine manual. 2. If the glue spraying of the hot melt glue machine is stable at the beginning, and the glue path is skewed during the walking process, it can b...
Read More
-
Cleaning steps of filter screen of hot melt glue gun
Aug 23 , 2021
The filter screen of hot melt glue gun is mainly used to filter the impurities in the glue and reduce the damage to the main body of the glue gun. The hot melt glue gun is mainly divided into two types: one is the manual hot melt glue gun, and the other is the self hot melt glue gun, also known as needle valve. The manual hot melt glue machine is manually controlled. The amount of glue ejected is ...
Read More
-
Several factors affecting the development of automatic dispensing machine
Aug 25 , 2021
1. The key factors for the success of Technology Industry: R & D ability, process innovation ability, product innovation ability, constantly developing new products and occupying new markets. In this way, it will avoid homogeneous competition. 2. Key factors for the success of sales industry: technical support, customer service, order processing, product line and alternative product width, com...
Read More
contact us
