-
The reason why the hot melt glue machine does not heat up
Aug 16 , 2021
With the change of the times, mechanization is getting closer and closer to life. Most of the products used in life need to be bonded to form objects. The glue required for traditional bonding has been gradually eliminated with the strengthening of environmental protection awareness, and the environmental friendly hot melt adhesive has gradually appeared in the public view, Among them, the essenti...
Read More
-
How to choose a good hot melt hose?
Aug 19 , 2021
From the analysis of the current sales, the glue machine hose has occupied most of the market, but how to distinguish the inferior hot melt glue hose? Let me share some small methods for everyone. 1. The insulating layer is easy to wear and leakage occurs 2. Glue leakage occurs when the insulating sleeve is broken 3. The rusty joints will also cause glue leakage 4. The pipe bursts due to uneven he...
Read More
-
Installation of Hose & Nozzle Assembly
Aug 20 , 2021
1.Fix the nozzle assembly horizontally or vertically in a proper place (assembly line,a desktop shelf,etc) with a Ф0.5” steel stick. Keep the nozzle facing the area to be sprayed or injected or coated. Note:When removing or installing nozzle assembly,extreme care should be given to protect the nozzle. 2.Connect one side of the hose to the outlets of manifold,and tighten the connection part with a ...
Read More
-
How to maintain the book binding hot melt adhesive machine
Aug 23 , 2021
How to maintain the book binding hot melt adhesive machine? Firstly, we have the most important point about how to operate the book binding hot melt adhesive machine, which must be operated by a specially assigned person. Then, we need to maintain the hot melt adhesive machine regularly. The following points need to be paid attention to when maintaining the hot melt adhesive machine. 1. Regularly ...
Read More
-
Is the hot melt glue machine dangerous to operate?
Aug 24 , 2021
As a beginner who has just taken over to operate the hot melt adhesive machine, there are still certain risks, such as temperature control, glue volume control, glue filling time, etc. These issues need to be considered, then let's take the following Let's see how to operate the hot melt glue machine to avoid danger： 1. Be sure to wear gloves and goggles when operating the hot melt machine 2. It i...
Read More
-
Development history of hot melt adhesive
Aug 26 , 2021
Hot melt adhesive has been used in packaging since the late 1950s. Due to its unique advantages, it has incomparable advantages compared with other adhesives, and has become one of the fastest developing varieties of adhesives. It is widely used in corrugated board manufacturing, corrugated box forming, paper bag manufacturing, etc. it was popular in Europe and America from 1960s to 1970s, and is ...
Read More
-
Precautions for using hot melt glue machine in summer
Oct 21 , 2021
The hot melt glue machine is a high-temperature product. In summer, the temperature will inevitably be much higher than usual. In order to avoid unnecessary failures or accidents that affect production efficiency, use it in summer. Matters needing attention of hot melt glue machine: 1. When there is no hot melt glue in the melting tank of the hot melt glue machine, the glue machine should not be h...
Read More
-
What are the major factors that affect the quality of hot melt adhesive machine edge banding?
Oct 27 , 2021
In the woodworking industry, the hot melt glue machine uses spray glue to seal the edges, which is widely used. At the same time, its edge sealing quality is affected by several factors. These are also the major factors that should be paid attention to when using the hot melt glue machine. What are these factors? 1. The production speed of the enterprise. The production speed of the hot melt adhes...
Read More
-
Hook loop tapes glue dispensing machine troubleshooting
Nov 17 , 2021
Troubleshooting Adhesive automatic hot glue dispenser machine does not run : 1. Check if the release paper is installed in place. The release paper holder is equipped with a material detector. When the material leaves the detector, the machine may not run 2. Check if the feed switch is turned on and the switch is out 3. Check whether the power supply is connected correctly No glue from the gl...
Read More
contact us
