-
Installation of Hose & Nozzle Assembly
Aug 20 , 2021
1.Fix the nozzle assembly horizontally or vertically in a proper place (assembly line,a desktop shelf,etc) with a Ф0.5” steel stick. Keep the nozzle facing the area to be sprayed or injected or coated. Note:When removing or installing nozzle assembly,extreme care should be given to protect the nozzle. 2.Connect one side of the hose to the outlets of manifold,and tighten the connection part with a ...
Read More
-
How to correct the crooked glue strips ejected from the hot melt glue machine
Aug 21 , 2021
1. During the glue spraying process of the hot melt glue machine, the glue strip is not straight when it is turned on from the beginning. , Do not hit the air pressure too high, it should be within the specified range of the hot melt glue machine manual. 2. If the glue spraying of the hot melt glue machine is stable at the beginning, and the glue path is skewed during the walking process, it can b...
Read More
-
How to maintain the book binding hot melt adhesive machine
Aug 23 , 2021
How to maintain the book binding hot melt adhesive machine? Firstly, we have the most important point about how to operate the book binding hot melt adhesive machine, which must be operated by a specially assigned person. Then, we need to maintain the hot melt adhesive machine regularly. The following points need to be paid attention to when maintaining the hot melt adhesive machine. 1. Regularly ...
Read More
-
Cleaning steps of filter screen of hot melt glue gun
Aug 23 , 2021
The filter screen of hot melt glue gun is mainly used to filter the impurities in the glue and reduce the damage to the main body of the glue gun. The hot melt glue gun is mainly divided into two types: one is the manual hot melt glue gun, and the other is the self hot melt glue gun, also known as needle valve. The manual hot melt glue machine is manually controlled. The amount of glue ejected is ...
Read More
-
How to clean up the debris in the hot melt glue machine
Aug 24 , 2021
Hot melt glue machines have been widely used in the packaging industry. Hot melt automatic spray nozzle machines are high-temperature operating equipment. After a long time of use, some carbides will be generated in the glue box. Today we will talk about how to clean up the debris of the hot melt glue spraying machine. First of all, we need to increase the temperature of the melter to 120 degrees....
Read More
-
Is the hot melt glue machine dangerous to operate?
Aug 24 , 2021
As a beginner who has just taken over to operate the hot melt adhesive machine, there are still certain risks, such as temperature control, glue volume control, glue filling time, etc. These issues need to be considered, then let's take the following Let's see how to operate the hot melt glue machine to avoid danger： 1. Be sure to wear gloves and goggles when operating the hot melt machine 2. It i...
Read More
-
Several factors affecting the development of automatic dispensing machine
Aug 25 , 2021
1. The key factors for the success of Technology Industry: R & D ability, process innovation ability, product innovation ability, constantly developing new products and occupying new markets. In this way, it will avoid homogeneous competition. 2. Key factors for the success of sales industry: technical support, customer service, order processing, product line and alternative product width, com...
Read More
-
Hot melt adhesive machine and construction, packaging industry
Aug 25 , 2021
(1) Hot melt adhesive machine for construction In the construction industry, hot melt glue machine is mainly used for structure and decoration, such as insulation and isolation of cork plywood, laminated wood plastic floor, wallpaper, etc., and bonding of decorative plates and non stress components. The use of hot melt glue machine in buildings can not only improve the building quality, increase t...
Read More
-
Advantages of hot melt adhesive in hot melt adhesive machine
Aug 26 , 2021
Performance advantages of hot melt adhesive in hot melt adhesive machine; ① Fast curing speed, good bonding strength and flexibility. The hot melt adhesive ejected by the hot melt adhesive machine can be cured and bonded within tens of a second to a few seconds. It has the characteristics of melting when heated and sticking when cooled. This enables the packers to use the hot-melt machine to adopt...
Read More
contact us
