-
Entering winter, you need to know about these operations of hot melt adhesive machines
Nov 20 , 2023
1.As the temperature gradually drops in winter, some customers have experienced poor adhesion, brittle hot melt adhesive, and degumming when using hot melt adhesive for production. What is the reason? Hot melt adhesive is sensitive to ambient temperature. Due to the cold temperatures in winter, the hot melt adhesive bonding process is cold, resulting in rapid solidification and hardening. Some glu...
Read More
-
How to select high-quality hot melt glue machines
Dec 01 , 2023
When choosing a high-quality hot melt adhesive machine, attention should be paid to the following aspects: 1. Quality and Durability: A high-quality hot melt adhesive machine should have good durability and reliability, be able to maintain stable operation under long-term high-intensity working conditions, and avoid losses caused by frequent shutdowns due to faults. 2. Performance parameters: Suit...
Read More
-
Why hot melt adhesive cools before bonding
Mar 26 , 2024
The hot melt adhesive cools before bonding. The reasons and solutions are as follows: (1) The use temperature of hot melt adhesive is low → increase the use temperature; (2) The opening distance is too long → reduce the opening distance; (3) The conveyor belt speed is too slow → increase the conveyor belt speed; (4) The amount of glue applied is not enough → increase the amount of glue applied; (5...
Read More
-
Hot melt glue machine with temperature standby function
Apr 15 , 2024
Our hot melt glue machine is equipped with a temperature standby setting function, which can set the insulation temperature according to actual production requirements to prevent glue carbonization, reduce power consumption, shorten the heating time due to shift changes or lunch breaks, and prevent the glue from being overheated during breaks. affecting its performance, thereby causing inconvenien...
Read More
-
How to clean the hot melt glue gun nozzle?
Aug 05 , 2024
The nozzle is the part of the hot melt glue gun that is responsible for dispensing glue. It is also an important part of the hot melt glue machine accessories. If the glue spray is blocked due to improper use of the hot melt glue gun, it will greatly affect the work efficiency. So how to clean the hot melt glue gun nozzle? 1. Use a smokeless hot air gun to heat it, and then wipe it clean with a cl...
Read More
-
What are the safety precautions when installing a PUR hot melt adhesive machine?
Aug 13 , 2024
1. The PUR hot melt adhesive machine needs to be connected to the power supply by a professional electrician. The polarity of the power supply must not be reversed, and the wiring needs to be fixed with special terminals. 2. When installing the pressure plate PUR hot melt adhesive machine, a useful grounding wire must be correctly connected. Any equipment that uses high-voltage electricity needs t...
Read More