-
The method of cleaning nozzles
Aug 17 , 2021
The nozzle is an important part of the hot melt glue machine accessories. The glue comes out of the glue nozzle, but if it is used improperly, it is easy to cause blockage and reduce work efficiency. So when we stop using the hot melt glue machine, what should we do? How about cleaning nozzles? 1. Use a smokeless hot air gun to heat it, and then wipe it clean with a clean cloth. 2. The nozzle is i...
Read More
-
The reason why the hot melt glue machine does not heat up
Aug 16 , 2021
With the change of the times, mechanization is getting closer and closer to life. Most of the products used in life need to be bonded to form objects. The glue required for traditional bonding has been gradually eliminated with the strengthening of environmental protection awareness, and the environmental friendly hot melt adhesive has gradually appeared in the public view, Among them, the essenti...
Read More
-
Storage method of hot melt pellets
Aug 16 , 2021
Storage method of hot melt pellets: Precautions : 1. Sealed and stored. Hot-melt rubber particles will absorb moisture when exposed to the air. It is impossible to judge whether it absorbs water due to its appearance. The water-containing rubber particles tend to foam when they are melted, and reduce the bonding strength. Therefore, seal it to prevent moisture after application. 2. Hot-melt rubber...
Read More
-
Types of hot melt glue gun
Aug 14 , 2021
The hot melt glue gun is a supporting tool for the hot melt glue machine. It is used to apply glue to the material. The hot melt glue machine melts the glue and then sprays the glue onto the material with the glue gun. As the hot melt glue machine is beginning to be used in more and more industries Therefore, in order to allow customers to use them better, hot melt glue machine manufacturers have ...
Read More
-
The reason why the sealing machine is not strong
Aug 14 , 2021
1. Material selection of the box: The selection error mainly refers to the imperfect matching of the hot melt adhesive or the type of boxes that need to be bonded, and it is difficult to meet the process requirements of the material itself. 2. The temperature during compounding does not meet the requirements: The compounding temperature does not reach the melting point of the adhesive film or omen...
Read More
-
Application of hot coating machine in medical industry
Aug 13 , 2021
Manufacturers have their own unique requirements for medical packaging (including medicines and medical devices), including reliable barriers that can withstand sterilization, prevent medicines from being secretly changed, easy to use, strong in texture, reasonable in price, and easy to use. Timely delivery, reliable technical backing, etc. For a multi-layer composite material, it is required that...
Read More
-
What should we do if the hot melt glue machine makes noise?
Aug 13 , 2021
The hot melt glue machine has aerodynamic noise: it is caused by the vibration of the gas body, such as the noise caused by the exhaust fan, the refrigeration compressor, the automobile engine, the jet plane and the rocket bomb. Magnetically induced noise: Noise caused by magnetically induced vibrations, such as motors, generator sets, and transformers. Reflective noise: noise caused by solid-stat...
Read More
-
Precautions and treatment methods for surface hot melt adhesive bonding
Aug 11 , 2021
The key points of hot melt adhesive bonding knowledge and some basic processing methods. To activate the surface to be adhered, through chemical or physical methods, some polar groups are introduced into the surface layer, so that the low-energy surface becomes the high-energy surface, the inert surface becomes the active surface, and the difficult-to-stick surface becomes the easy-adhesive surfac...
Read More
-
What is the reason for the insufficient amount of glue in the pump of the hot melt glue sprayer?
Aug 11 , 2021
The hot melt glue machine can work 24 hours a day, but what is its working principle? In fact, it is very simple, mainly by heating the hot-melt adhesive, and transporting the liquid hot-melt adhesive through power. The pump of the hot melt glue machine is the main power and the center of the operation of the hot melt glue machine. Sometimes when working, there will be insufficient pumps. This sit...
Read More
-
YT-Q10P2 Pistion air pump hot melt glue machine
Aug 10 , 2021
1. Adopt brand PID artificial intelligence temperature controller, artificial intelligence adjustment algorithm with auto-tuning (AT) function, high temperature control accuracy. 2. The pneumatic power system saves energy and effectively reduces the production cost of the enterprise. 3. The vertical air pump is independently suspended, the glue is stable, the disassembly and assembly are convenien...
Read More
contact us
