Offset Paper And Writing Paper Hot Melt Adhesiveding Glue Book Binding Spine Glue

Physical                                       Value                                      Testing method

Main component        Ethylene-vinyl acetate copolymer           

Appearance                           Fake/Granule                                   Observation
Color                                              Milky                                        Observation
Softening point °C                         80.8                                      GB/T 15332-1994

Open Time (sec.)                          30-35                                         HM-02-01

Set time (sec.)                                3-5                                           HM-02-02

Hardness (Shore A).                       90                                         ASTM D2240

Viscosity                                                                           Brookfield Cap#2000，＃5/50R

Suggestion:

1. Operation temperature: 130~170°C

2. Operation way: roller coating

3.Packing: 25kgs/bag

Notice :

1. Open time and set time may be changed by adhesive temperature, room temperature, coating amount, fitting time and pressure, etc.

2. Temperature of Melting adhesive is high. DO NOT touch in case of scald. If scald by accident, put the scald dip in water for 10 minutes, and go to hospital.

3. Clean the substrate surface before use.

4. The operation temperature shall not over 180°C for long time, to avoid reducing the bonding strength of adhesive to substrate

5. Store in well-ventilating place, avoid direct sunlight.

6. The data contained herein are for reference only and shall have no legal effect.