Safety precautions during installation of hot melt glue machine:

   1. When installing the hot melt glue machine, a correct and effective grounding wire must be connected. Any equipment that uses high-voltage electricity needs to have a grounding wire. When the grounding wire is not used, any component protected by an insulator on the hot melt glue machine may still form a voltage conductor, which may cause the risk of electric shock.

  2. According to the load required by the hot melt glue machine and its auxiliary peripheral equipment, check whether the power cord used and the insulation protection meet the regulations. The load of the wire must be higher than the rated power of the hot melt glue machine.

3. Make sure that the external voltage connected to the hot melt glue machine is in line with the hot melt glue machine itself, such as a single-phase 220v voltage standard hot melt glue machine equipment, if the 380V power supply is used, it will damage the hot melt glue machine spraying equipment, such as single phase If the hot melt glue machine equipment with 220v voltage standard uses a power supply lower than 220V, the design performance of the equipment cannot be achieved, and the hot melt glue machine may be damaged. When wiring, ensure that the power cord is correctly connected to the location of the external circuit breaker. .

  4. Ensure that the hot melt machine is operated under the specified voltage. If the voltage used is different from the specified voltage, the hot melt machine may be burnt.