-
Seven factors that affect the opening time of hot melt adhesives
Jul 28 , 2021
1. Ambient temperature The ambient temperature has an important influence on the open time of the hot melt adhesive. As soon as the adhesive leaves the nozzle, the temperature drops. So in cold production areas, the adhesive will cool faster, thereby shortening the open time. In warm production areas, the adhesive temperature drops more slowly, so the open time can be extended. 2. Substrate temper...
Read More
-
The reason why we use hot melt glue machine with manual gun
Jul 28 , 2021
Many companies still use the ordinary glue gun with direct plug-in. This kind of glue gun is cheap. It uses strip hot-melt glue. However, in the process of use, it always needs to change the stick glue, which has low production efficiency. It often can't be shipped and delivered. Moreover, this kind of glue stick can't melt cleanly in use, which is not only a waste of time but also a waste of cost...
Read More
-
Hot melt glue fiber gun diaper nozzle
Jul 30 , 2021
Fiber spray gun is widely used in non-woven fabric composite, coating and bonding operations. Characteristics of Fiber Rotary Spray Gun: 1. Decomposable gun body design, novel structure and convenient maintenance; 2. The spray glue is low in weight, and the low air pressure is controlled; 3. It can effectively control the size, density and shape of the spray glue under the condition of continuous ...
Read More
-
Introduction of hot melt glue hose
Jul 30 , 2021
1.The use of imported Teflon liner, has good flexibility, good bending performance (maximum bending radius of 20cm), anti-sticking and temperature resistance (up to 220 degrees), can greatly reduce the carbonization phenomenon; 2.The heater by the United States and the temperature of the heating wire lines, evenly wrapped around the pipe wall, with good insulation and uniform thermal conductivity,...
Read More
-
YT-DT1000 Hot Melt Glue Applicator Machine Small Carton Gluing Machinery
Aug 02 , 2021
1. Specially designed for gluing large-area flat materials according to product requirements and different materials. The thickness of the glue can be adjusted. Environmentally friendly hot melt glue is used instead of self-adhesive glue, water-based glue, etc. 2. It has a safety design to prevent the hand from being caught in the roller, and the device to prevent the work from being caught in the...
Read More
-
YT-LS100 Strip hot melt glue gun automatic nozzle
Aug 03 , 2021
Features of strip hot melt glue gun: 1. Optimize the gun body control module, and adopt multiple combination seals to ensure that the gun is prevented from being polluted by leaking glue after a long time of work. 2. The special design of the switch glue liquid contact point ensures the high sensitivity of the switch glue. 3. The integrated module and the main body of the scraper can produce fast ...
Read More
-
Product features of manual hot melt glue hand gun
Aug 04 , 2021
Product features of manual hot melt glue hand gun: Mainly used in: car lamp sealing, carton sealing, sheet compounding, etc., suitable for manual gluing and spraying applications. Make up for the shortcomings of automatic spray guns and meet the needs of mobile use. The shell of the gun body is made of imported materials and can withstand high temperatures of 300 ℃, ensuring that there will be no ...
Read More
-
Hot melt adhesive glue
Aug 04 , 2021
Hot melt adhesive is a 100% solid, which becomes molten after heating, and it condenses when it contacts the air when it meets the cold surface, and then it only takes a few seconds to finish. Compared with solvent-based and water-based solvents, the primary benefits are as follows: 1. After a short time, to ensure high-efficiency production. 2. No need for drying equipment, saving space. 3. Non-t...
Read More
-
The reason why the hot glue can be melted
Aug 05 , 2021
It may be a very complicated situation that the hot melt adhesive cannot be melted. It is the result of the mixing of the above reasons. There are many carbides in the glue furnace, which will cause inaccurate temperature control of the equipment for a long time. Even if the glue furnace is cleaned regularly later, but the temperature control of the equipment has long been damaged, it is difficult...
Read More
contact us
