-
How does the hot melt glue machine apply glue to the courier bag
Nov 01 , 2021
A layer of glue is applied to the seal of the express bag. Traditionally, double-sided tape is used. Now in order to improve product quality and production efficiency, hot melt glue and hot melt glue machines are used. So how does the hot melt glue machine apply glue to the courier bag? Paper courier bags not only need to be glued on the seal, but also need to be glued on the sides. The scraping m...
Read More
-
The hot melt glue machine automatically sprays glue on the daily necessities packaging box
Nov 05 , 2021
In supermarkets, we often see that all kinds of daily necessities are packed in cartons or cartons, but we have not seen the transparent tape sealing, in fact, it is sealed with hot melt adhesive. You tear open the carton or carton, and there is a hard solid on it, which is hot melt adhesive. Now we advocate environmental protection and reduce the use of tape. The environmental protection of hot m...
Read More
-
YT-ZB101 Leather edge folding gluing machine
Nov 17 , 2021
Leather edge gluing machine is suitable for leather industry products, such as shoes, clothing, leather bags, golf bags, wallets, bag bottoms and so on. It is a very economical machine because it is easy to operate, meets environmental protection requirements and improves work efficiency. Main Specifications Working power supply:AC220V±10%; 50/60HZ Working environment:Non-corrosive and strong elec...
Read More
-
Hook loop tapes glue dispensing machine troubleshooting
Nov 17 , 2021
Troubleshooting Adhesive automatic hot glue dispenser machine does not run : 1. Check if the release paper is installed in place. The release paper holder is equipped with a material detector. When the material leaves the detector, the machine may not run 2. Check if the feed switch is turned on and the switch is out 3. Check whether the power supply is connected correctly No glue from the gl...
Read More
-
Clear ing Nozzle Assembly
Nov 18 , 2021
Clear ing Nozzle Assembly Nozzle will be jammed if filter assembly is blocked or broken, or if chars exist in hose/glue tube or nozzle assembly. Chars is formed because hot melt is overheated. Sometimes in these circumstances hose/glue tube and nozzle assembly need to be changed completely. Heat the nozzle assembly to desired temperature. -Minimize the air pressure of the cylinder pump of the hydr...
Read More
-
Hot melt carton sealing adhesive gluing machine
Nov 19 , 2021
Features: 1. Stainless steel appearance, beautiful and high-grade equipment, stable operation. 2. The operation is simple, the application range is wide, and the running speed can be set according to the demand of production capacity. 3. It adopts manual opening and discharging, which is operated by chain machinery, and automatically rolls glue (or spray glue) and presses the box to form output du...
Read More
-
Things to be aware of when using hot glue roller adesive coater
Nov 23 , 2021
Things to be aware of when using glue roller applicator: ●When using a hot melt machine, do not place other sundries on the machine or use it as a padded device. ●When moving or lifting the hot melt machine, only use the base. Do not use the cover on the hot melt machine, the door, the electrical components on the control panel or the joint on the insulation pipe to lift up the hot melt adhesive. ...
Read More
-
Safety when using hot melt adhesives and solvents
Nov 23 , 2021
Safety when hot glue dispensing machine applys hot melt adhesives and solvents Hot glue adhesive When using high temperature hot melt adhesives, pay more attention to the following: ●The hot melt adhesive can quickly condense into a solid at a high liquid temperature. Even if the appearance is solid, the inside is still liquid and has a high temperature. Once it touches the human skin, it will cau...
Read More
-
Checking hot glue application systems before using
Nov 29 , 2021
1.Check the exterior surface of the hot glue paper pasting machine melter and the control panel for scratches, cracks, corrosion, and bumps. 2.Open the control room cover of the melter and check if the power connector of the control room is loose. 3.Inspect the sprinkler combination for damage to the power and hydraulic system connections and inspect the protective layer for scratches. 4.Chec...
Read More
contact us
