The hot-melt adhesive machine is a high-temperature product, so it must be operated with great attention. The hot-melt adhesive machine needs to be cleaned after a long time of use. Regular cleaning is helpful for the operation of the hot-melt adhesive machine. And what are the cleaning steps of the hot melt adhesive machine?

1. Wear anti-scald shield and gloves

2. Heat the hot-melt adhesive machine to 130-150 degrees, and release some pressure from the pressure valve of the main machine to avoid excessive pressure. After the glue comes out, you will accidentally burn people, and then remove the hot-melt adhesive hose to remove the remaining glue in the barrel. Attention: use a clean container to catch the glue, so that it can be used again after the glue dries, especially remember not to mix impurities, so as not to block the glue machine and affect the use.

3. Use tools to remove the filter screen in the hot melt machine equipment and clean it (the maintenance knowledge of the glue is clearly described, how to clean the host filter screen steps)

4. Pour the cleaning agent into the rubber bucket and add a small amount of hot melt adhesive to melt it and remove it together.

5. Reinstall the filter in the hot melt adhesive machine, connect the hot melt adhesive hose and glue gun, and re-add hot melt adhesive to use

The cleaning steps are these few steps, you must remember to clean the hot melt adhesive machine regularly, for the efficient operation and service life of the product.