-
What affects the sticking effect of hot melt glue machine on paper products
Nov 01 , 2021
In traditional production, paper products are pasted with water glue and tape. With the environmental protection requirements of the times, paper products are pasted and formed with hot melt adhesives, such as various paper boxes, cartons, express bags, handbags, etc. Electronic product packaging boxes, etc. To use hot melt adhesive, you need to spray it on the paper product with a hot melt adhesi...
Read More
-
How does the hot melt glue machine apply glue to the courier bag
Nov 01 , 2021
A layer of glue is applied to the seal of the express bag. Traditionally, double-sided tape is used. Now in order to improve product quality and production efficiency, hot melt glue and hot melt glue machines are used. So how does the hot melt glue machine apply glue to the courier bag? Paper courier bags not only need to be glued on the seal, but also need to be glued on the sides. The scraping m...
Read More
-
Fuse problem when using hot melt glue machine
Nov 06 , 2021
Each hot melt glue machine has a capacity limit. When the hot melt glue in the glue box is not less than 1/3, you need to add hot melt glue. The hot melt glue machine can add glue while working, just open the glue box to add glue while working. People who use hot melt glue machine equipment sometimes find the phenomenon of smoking. This phenomenon is a bad phenomenon and needs to be solved in time...
Read More
-
Hook loop tapes glue dispensing machine troubleshooting
Nov 17 , 2021
Troubleshooting Adhesive automatic hot glue dispenser machine does not run : 1. Check if the release paper is installed in place. The release paper holder is equipped with a material detector. When the material leaves the detector, the machine may not run 2. Check if the feed switch is turned on and the switch is out 3. Check whether the power supply is connected correctly No glue from the gl...
Read More
-
Clear ing Nozzle Assembly
Nov 18 , 2021
Clear ing Nozzle Assembly Nozzle will be jammed if filter assembly is blocked or broken, or if chars exist in hose/glue tube or nozzle assembly. Chars is formed because hot melt is overheated. Sometimes in these circumstances hose/glue tube and nozzle assembly need to be changed completely. Heat the nozzle assembly to desired temperature. -Minimize the air pressure of the cylinder pump of the hydr...
Read More
-
Hot melt carton sealing adhesive gluing machine
Nov 19 , 2021
Features: 1. Stainless steel appearance, beautiful and high-grade equipment, stable operation. 2. The operation is simple, the application range is wide, and the running speed can be set according to the demand of production capacity. 3. It adopts manual opening and discharging, which is operated by chain machinery, and automatically rolls glue (or spray glue) and presses the box to form output du...
Read More
-
Things to be aware of when using hot glue roller adesive coater
Nov 23 , 2021
Things to be aware of when using glue roller applicator: ●When using a hot melt machine, do not place other sundries on the machine or use it as a padded device. ●When moving or lifting the hot melt machine, only use the base. Do not use the cover on the hot melt machine, the door, the electrical components on the control panel or the joint on the insulation pipe to lift up the hot melt adhesive. ...
Read More
-
Safety when using hot melt adhesives and solvents
Nov 23 , 2021
Safety when hot glue dispensing machine applys hot melt adhesives and solvents Hot glue adhesive When using high temperature hot melt adhesives, pay more attention to the following: ●The hot melt adhesive can quickly condense into a solid at a high liquid temperature. Even if the appearance is solid, the inside is still liquid and has a high temperature. Once it touches the human skin, it will cau...
Read More
-
YT-QB202 hot melt adhesive spraying machine melter
Nov 24 , 2021
The YT-QB202 series Hot Melt Applicator is designed to melt all forms and shapes of hot melt adhesives. It can be used in the range of 500-12,000 CPS and is suitable for manual and semi-automatic applications. The inside is pumped with a pneumatic piston. The machine can be divided into two main parts, the electrical control part and the mechanical part. The mechanical part also includes a hydraul...
Read More
contact us
