-
Hot melt adhesive glue
Aug 04 , 2021
Hot melt adhesive is a 100% solid, which becomes molten after heating, and it condenses when it contacts the air when it meets the cold surface, and then it only takes a few seconds to finish. Compared with solvent-based and water-based solvents, the primary benefits are as follows: 1. After a short time, to ensure high-efficiency production. 2. No need for drying equipment, saving space. 3. Non-t...
Read More
-
Application of hot melt adhesive on sanitary wipes
Aug 06 , 2021
Sanitary wipes have a sterilizing effect and can be used to clean and sterilize the surface of objects. Because the sterilization effect is required, the disinfected wet wipes contain alcohol, chlorine-containing disinfectants or preservatives; and alcohol is volatile, and the wet wipes with the cover can prevent the intrusion of microbial contamination from the opened package, and ensure that the...
Read More
-
How to identify hot melt adhesive quality
Aug 07 , 2021
There are many quality indicators of hot melt glue, requiring dedicated instruments and appropriate detection environments, in the absence of instrument equipment, is first seen from the appearance, there is no bubble. Secondly, the rubber is melted into a width of about 1 cm. Thick 0.2cm tape. After cooling, use it to extend the tape, and observe whether its stretch can achieve standards. Whether...
Read More
-
The reason why the hot melt glue machine does not heat up
Aug 16 , 2021
With the change of the times, mechanization is getting closer and closer to life. Most of the products used in life need to be bonded to form objects. The glue required for traditional bonding has been gradually eliminated with the strengthening of environmental protection awareness, and the environmental friendly hot melt adhesive has gradually appeared in the public view, Among them, the essenti...
Read More
-
Hot melt glue machine gear pump detailed description and daily maintenance
Aug 18 , 2021
The most important organ of the human being is the heart, the core of the car is the motor, and the main part of the gear pump hot melt glue machine lies in its gear pump. High-temperature gear pumps are indispensable equipment for hot melt adhesive transportation, pressurization and melt metering. Compared with other types of melt pumps, the high temperature gear pump has a compact structure, rel...
Read More
-
Hot melt glue machine filter cleaning
Aug 18 , 2021
The hot melt glue machine filter is a part of the hot melt glue machine. It is mainly used for the normal operation of the hot melt glue machine by the impurities that may appear in the container. A set of good equipment is properly maintained and can be used for decades. Because the hot melt glue machine is a high temperature operation, the working time is long, so it is more necessary to maintai...
Read More
-
How to choose a good hot melt hose?
Aug 19 , 2021
From the analysis of the current sales, the glue machine hose has occupied most of the market, but how to distinguish the inferior hot melt glue hose? Let me share some small methods for everyone. 1. The insulating layer is easy to wear and leakage occurs 2. Glue leakage occurs when the insulating sleeve is broken 3. The rusty joints will also cause glue leakage 4. The pipe bursts due to uneven he...
Read More
-
What happens if the hot melt glue machine is not processed for a long time?
Aug 19 , 2021
What should I do if I do not use the hot melt glue machine for a long time? 1. Clean all parts of the machine first, and do not leave any stains and dust impurities to prevent rust 2. After cleaning, put it in the vent to let the water vapor evaporate automatically. 3. Lubricate oil, protect oil, etc. on the roller position, 4. In order to prevent too much dust, it is recommended to find a dry, du...
Read More
-
Installation of Hose & Nozzle Assembly
Aug 20 , 2021
1.Fix the nozzle assembly horizontally or vertically in a proper place (assembly line,a desktop shelf,etc) with a Ф0.5” steel stick. Keep the nozzle facing the area to be sprayed or injected or coated. Note:When removing or installing nozzle assembly,extreme care should be given to protect the nozzle. 2.Connect one side of the hose to the outlets of manifold,and tighten the connection part with a ...
Read More
contact us
