The wear of the hot melt adhesive machine during work mainly includes the power supply of the hot melt adhesive machine, voltage, current load (pressure), relative motion speed, motion properties of the friction area, production environment and cleaning of the hot melt adhesive machine, etc. Wait.

Too large or too small power supply and voltage will cause the electrical appliances of the hot melt machine to burn out or fail to work, and the change of the moving speed of the parts will also affect the wear of the parts. The production environment is different, such as dust, dirt, ore powder, metal powder and other impurities, if they fall into the hot melt adhesive machine, it will not only accelerate the wear of the hot melt adhesive machine, but also make the bonding process difficult.

The only way to prolong the life of the hot melt adhesive machine is to use it correctly and maintain it properly. Don't underestimate these two points. It is not so simple to use it correctly and maintain it properly. The life of the melter is reduced.

When using the hot melt adhesive machine, pay attention to ensure that the use environment is at a suitable temperature and the surrounding environment does not have many volatile and corrosive substances.

Only in a suitable environment can it be operated safely. In addition, when we add glue, we must not overfill it. If it is too full, it will overflow, which will be difficult to clean and cause the heating rod to short-circuit and catch fire.

In the process of maintenance, we should not ignore the cleaning of its filter screen. Maintaining a cycle of periodic cleaning will also prolong its service life. During the cleaning process, we must stop the motor and always pay attention to safety. Question, if the hot melt machine is heated for a long time or not used for a long time, it should be maintained regularly.

What should be paid attention to when maintaining the hot melt adhesive machine?

1. Before the maintenance and maintenance of the hot melt adhesive machine, the power supply of the hot melt adhesive machine must be completely cut off to prevent electric shock accidents;

2. When cleaning the hot melt glue tank, do not use flames or sharp tools to avoid scratching the inner surface coating of the glue tank;

3. When maintaining the heating part, safety gloves, goggles and long-sleeved clothes should be worn to avoid burns;

4. The hot melt adhesive machine can only be repaired by qualified personnel;

5. In case of air leakage or glue leakage, the hot melt machine must not be used any longer;

6. When loosening or installing the pressure joint, it must be ensured that the operating pressure of the hot melt adhesive machine has dropped to zero;

Basically, if the usual maintenance can achieve the above points, the service life of the hot melt machine can be increased by at least 20%.